Materials Testing & Analysis Services
Non Disruptive Testing: A particularly useful non-destructive test used for internal examination is x-ray photography
The main body of the HV fuse and the two end caps were radiographed in order to determine the condition of the internal components. The fuse element had melted at all the notches and fulgurite had formed. The striker coil had also melted along its length and also adjacent to the striker spring. The melting of the wire should release the spring pushing the striker out of the fuse’s end cap. However the striker spring was compressed and in the un-operated condition.
The striker end cap was removed in order to examine the striker mechanism. The spring and striker was housed in an aluminium shell, on cutting away the aluminium shell the tension was released from the spring. The striker coil was through the bottom spring coil and had been crimped into a brass joint. The other end of the striker coil passed through a loop in the top of the striker and the melted end was free. The clearance between the striker and the brass insert in the end cap through which the striker should be expelled was too tight and did not allow the striker to pass through.
Non disruptive Testing: X-ray photography
For more Material Testing Techniques please return to Analytical's
Materials Testing and Analysis Services Page.
Alternitively you can return to the
Analytical Home Page for information on all our services.